Suspension 100
Suspension 100 Dragon Pharma
Testosterone · no ester · aqueous suspension · 100 mg/mL · 10 mL vial
Ester
None (base)
pure testosterone, water-based
Half-Life
~24 h
fastest-acting testosterone
Aromatization
High
AI required on cycle
Hepatotoxicity
None
no 17-alpha alkylation
Typical Dose
50–100 mg
per injection
Frequency
Daily / pre-WO
or every other day
Cycle Length
4–8 wk
typical run
Lab Tested
$44.00
$44.00
In Stock
Shipping
Suspension 100 Dragon Pharma — Overview
Suspension 100 Dragon Pharma is testosterone in its purest injectable form: no ester, no oil carrier, no delay. The molecule is unmodified testosterone suspended in an aqueous solution at 100 mg/mL, giving it a pharmacokinetic profile unlike any esterified testosterone on the market. Plasma testosterone peaks within hours of injection and returns to baseline just as quickly — a characteristic that makes Suspension the go-to choice for strength athletes chasing an acute androgen surge and bodybuilders who want the fastest possible testosterone loading window at the start of a cycle.
Where enanthate or cypionate take days to climb and weeks to clear, Suspension peaks hard and drops fast. That speed is both its primary advantage and the main reason it demands more frequent injections than any other testosterone form. steroidwarehouse.com carries Dragon Pharma's Suspension 100 in standard 10 mL vials alongside the full cycle support lineup needed to run it correctly.
Testosterone · No Ester Injectable Aqueous Suspension Mass & Strength Pre-Workout Use Experienced Users
On this page
About the Compound: Testosterone Suspension
Testosterone is the primary endogenous androgen in males and the reference compound for all anabolic-androgenic steroids. In Suspension 100, it is delivered without any ester modification — the molecule injected is 100% active testosterone with no ester weight diluting the dose. Every 100 mg in the vial is 100 mg of bioavailable hormone, compared to approximately 70 mg of actual testosterone in 100 mg of testosterone enanthate, where the ester accounts for roughly 30% of molecular weight.
- No ester — 100% active dose — unmodified testosterone means full bioavailability from the first milligram; no hydrolysis step, no esterase delay before the hormone reaches androgen receptor-positive tissue; this is the defining pharmacokinetic feature that separates Suspension from every other testosterone product
- Aqueous (water-based) carrier — unlike all esterified testosterone products which use oil, Suspension uses water; this enables faster release from the injection site but produces more post-injection discomfort than oil-based solutions due to the aqueous carrier and microcrystalline testosterone particles
- Half-life ~24 hours — daily or every-other-day injections are required to maintain stable blood levels; pre-workout injection timing (30–60 minutes before training) produces a testosterone peak that overlaps with the session, used by strength athletes for acute androgen drive on key training days
- High aromatization — testosterone aromatizes readily to estradiol via aromatase; rapid Suspension peaks can produce sharper E2 spikes between injections than long-ester protocols; AI management is mandatory from day one
- Strong HPG axis suppression — endogenous LH and FSH are suppressed during the cycle via androgen-mediated negative feedback; structured PCT is required after every cycle regardless of duration
Active Substance
Testosterone (no ester)
Concentration
100 mg/mL · 10 mL vial
Half-Life
~24 h (aqueous depot)
Aromatization
High — AI required
Water Retention
Moderate–High (E2-driven)
5α-Reductase
Yes → DHT
Hepatotoxicity
None
Detection Time
~3–4 weeks
PCT Start
24–48 h after last injection
What Suspension 100 Does
Testosterone acts through high-affinity binding to the androgen receptor (AR), a nuclear receptor that drives transcription of genes governing skeletal muscle protein synthesis, nitrogen retention, red blood cell production via EPO signaling, and IGF-1 secretion in hepatic and peripheral tissue. With Suspension, all of this happens faster than with any esterified form: there is no hydrolysis step, no esterase delay before the hormone reaches AR-positive tissue.
- Acute strength increase — strength gains can appear within the first week, driven by rapid AR activation, CNS excitability changes associated with elevated androgens, and enhanced phosphocreatine resynthesis; the onset speed is faster than with any esterified testosterone form
- Pre-workout androgen spike — injecting 30–60 minutes before training produces a testosterone peak that overlaps with the workout window; this technique is used by powerlifters and strength athletes before competition or peak sessions to acutely elevate androgen drive at the moment of performance
- Anabolic drive and muscle fullness — at supraphysiologic doses, testosterone increases muscle fiber cross-sectional area, suppresses myostatin signaling indirectly, and reduces catabolic cortisol during recovery; SHBG is reduced, increasing the free testosterone fraction available for AR binding and amplifying the effect of co-administered compounds
- Erythropoiesis — testosterone stimulates EPO production, gradually increasing hematocrit and red blood cell count; on a daily-injection Suspension protocol this effect is sustained continuously rather than in a slow build typical of long esters, making hematocrit monitoring more time-critical
- HPG axis suppression — endogenous testosterone production stops via androgen-mediated negative feedback on LH and FSH during the cycle; structured PCT is required after every cycle; the 24-hour half-life means the compound clears quickly and PCT can begin 24–48 hours after the last injection
Who It's For
- What sets Suspension 100 apart: among the testosterone products available at Steroid Warehouse, Suspension 100 is the only aqueous, ester-free form — delivering 100% active testosterone per milligram with immediate onset and a ~24-hour half-life. Propionat 100 is the next closest in half-life at 2–3 days, but oil-based with an ester that dilutes the per-milligram active dose. Enantat 250 and Cypionat 250 take days to peak and weeks to clear. Suspension is in a separate category: no delay, no ester weight, no long clearance tail.
- Best scenario: experienced users who time injections relative to competition or peak training sessions to leverage an acute androgen surge; powerlifters, Olympic lifters, and strongmen who want a testosterone protocol that responds within the same day; bodybuilders in the final 4–6 weeks before a show who want testosterone drive without a long-ester tail complicating clearance into the taper; users who need the fastest testosterone loading window at the start of a mass cycle before switching to a long ester for the remainder
- Choose something else instead: users running their first AAS cycle should not start with a daily-injection compound that requires tight AI and bloodwork management; anyone who finds daily injections unmanageable or reacts strongly to post-injection pain should use Propionat 100 (oil-based, every-other-day dosing, significantly lower PIP); users building a long 12–16 week mass cycle where stable hormone levels matter more than acute peaks should use Enantat 250 or Cypionat 250 as the testosterone base
Suspension 100 vs Alternatives
| Compound | Key Differences | Choose Suspension 100 When | Choose Alternative When |
|---|---|---|---|
| Propionat 100 Testosterone Propionate |
Oil-based; propionic acid ester adds 2–3 day half-life; every-other-day or every-3-day dosing; significantly lower post-injection discomfort than aqueous suspension; active dose per mg is lower due to ester weight | You need the absolute fastest testosterone onset — pre-workout peak timing, competition-day protocol, or same-day androgen drive with no ester delay | Daily injections and high PIP are a dealbreaker; you want short-acting testosterone in a more comfortable oil-based form with EOD dosing |
| Enantat 250 Testosterone Enanthate |
Oil-based; 7–10 day half-life; twice-weekly injections; very stable blood levels without peaks and troughs; standard base for long mass cycles; clear period of 14 days before PCT | You need the fastest-clearing testosterone for a short bridge or peak-week protocol with no long-ester tail to manage in the taper | You are running a 10–16 week mass cycle where stable hormone levels and twice-weekly injections are the priority over acute androgen spikes |
| Sustanon 270 4-ester testosterone blend |
Blend of four testosterone esters covering 1–18 day half-lives; complex release profile providing both early onset and long-term sustain; one injection per week workable for maintenance; decanoate tail creates a long clearance period before PCT | You want a single compound covering both fast initial testosterone rise and sustained long-term levels without switching products mid-cycle | The multi-ester blend with a long decanoate tail complicates PCT timing and clearance calculations; Suspension exits cleanly in 24–48 hours with no tail |
Combinations
Suspension 100 works as a primary testosterone base or as a fast-acting androgen layer added to an existing ester-based cycle. Below are the combinations most commonly discussed by physique athletes and strength sports competitors.
| Goal | Stack | Notes |
|---|---|---|
| Off-season mass | Suspension 100 100 mg/day + Deca 300 400 mg/wk + Dianabol 20 40 mg/day weeks 1–4 | Classic mass stack; Suspension provides rapid AR activation and covers the base testosterone requirement; Deca 300 adds connective tissue support and sustained anabolism; Dianabol drives early glycogen loading and fullness; manage E2 with Arimidex DP throughout; run Suspension daily for the first 4 weeks then reassess frequency |
| Strength peak (powerlifting) | Suspension 100 50–100 mg pre-workout + Trenbolone 100 300–400 mg/wk | Pre-workout Suspension produces an acute testosterone spike timed to the session; Trenbolone 100 adds aggression, nutrient partitioning, and strength without aromatization; aggressive combination — experienced users only; monitor blood pressure weekly; Trenbolone does not require AI but Suspension does — Arimidex DP at low dose (0.25 mg EOD) is typically sufficient given the low Suspension volume |
| Contest prep | Suspension 100 50–100 mg/day + Winstrol Inject 50 mg/day + Masteron 100 400 mg/wk | Suspension delivers androgen drive with no ester residue in the final weeks of prep; Winstrol and Masteron 100 harden muscle, suppress SHBG, and produce the dry, striated appearance without water retention; watch lipid panel closely — Winstrol suppresses HDL aggressively; this stack produces minimal estrogen so AI dose should be guided by bloodwork, not assumed |
| Lean mass / recomp | Suspension 100 50 mg/day + Primobolan 100 400 mg/wk | Lower estrogen burden than mass stacks; Primobolan 100 adds lean tissue with mild androgenic activity and minimal suppression relative to its anabolic effect; Suspension provides the testosterone base without a long-ester tail; suitable for athletes who want quality gains without significant water retention; AI dose can be conservative with this stack |
Side Effects & Management
Because Suspension 100 is pure testosterone with high aromatization potential, the main concerns are estrogen-related: E2 elevation, water retention, and gynecomastia. Androgenic effects and cardiovascular markers are dose-dependent and manageable with the right protocol from day one.
| What May Occur | Background | How to Handle It |
|---|---|---|
| E2 elevation / gynecomastia | Testosterone aromatizes readily to estradiol via aromatase; rapid Suspension peaks produce sharper short-duration E2 spikes between injections than long-ester protocols; estrogenic symptoms (nipple sensitivity, water retention, mood changes) can appear within the first week at effective doses | Arimidex DP 0.5 mg EOD is the standard AI; switch to Aromasin DP 25 mg EOD if estrogen rebound is a concern; guide AI dose by bloodwork, not symptoms — over-suppression impairs joint lubrication, libido, and lipid profile; test E2 on a non-injection day for an accurate trough reading |
| Injection site pain (PIP) | Aqueous suspension and microcrystalline testosterone particles are more irritating to tissue than oil-based esters; PIP on water-based testosterone preparations is well-documented and significantly higher than with propionate or enanthate solutions; discomfort typically peaks at 12–24 hours post-injection and resolves within 48 hours | Warm the vial to body temperature before drawing; inject slowly over 30–45 seconds; rotate sites consistently and document rotations; a 23–25G needle works for most sites; diluting in the barrel with bacteriostatic water reduces local irritation in some users; abdominal sites tend to produce less PIP than glutes for aqueous preparations |
| Acne and oily skin | DHT conversion via 5α-reductase elevates sebaceous gland activity; rapid androgen spikes from daily injections can trigger more pronounced breakouts than steady-state ester protocols, particularly in the first 2–3 weeks of the cycle | Moderate cases: Doxycycline 100 mg/day; severe or cystic: Accutane Dragon Pharma after hepatic markers are confirmed clear; topical benzoyl peroxide wash as baseline prevention; ensure face and injection sites are cleaned before and after injections |
| Accelerated hair thinning | DHT binds androgen receptors in scalp follicles, accelerating miniaturization in genetically susceptible users; effect is dose-dependent and more pronounced with high-frequency high-peak testosterone protocols like daily Suspension | Finasteride DP 1 mg/day reduces DHT conversion at the scalp; only applicable on testosterone-dominant cycles — finasteride does not block trenbolone, DHT-derivative compounds, or any 5α-reduced androgens; worth factoring into compound selection if family history of androgenic alopecia is present |
| HDL reduction / lipid changes | Supraphysiologic testosterone suppresses HDL and modestly raises LDL; the effect compounds when Suspension is stacked with lipid-aggressive compounds like Winstrol, Trenbolone, or Masteron; the cardiovascular strain of intense training on these stacks amplifies the overall lipid impact | Rosulip (Rosuvastatin) 10–20 mg/day or Atorlip (Atorvastatin) 20–40 mg/day; introduce at week 4–6 if HDL drops below 40 mg/dL or LDL exceeds 130 mg/dL; omega-3 supplementation and reduced dietary saturated fat throughout the cycle |
| Blood pressure elevation | Fluid retention from E2 excess, increased red blood cell mass from continuous EPO stimulation, and water retention all contribute to BP elevation; daily Suspension injections sustain high-peak testosterone more continuously than long esters, making BP monitoring especially important | Primary step: optimize AI dosing and manage hematocrit; if BP remains above 130/80: Amlip (Amlodipine) 5 mg/day; add Ecosprin (Aspirin) 75 mg/day as antiplatelet cardiovascular support; weekly home cuff monitoring is non-negotiable on daily-injection protocols |
| Libido disruption / ED | Supraphysiologic testosterone with poor E2 control — either too high from insufficient AI or too low from over-suppression — disrupts normal erectile function; HPG axis suppression removes endogenous LH and FSH during the cycle, which can reduce libido independently of E2 levels | On-cycle: Proviron DP 25–50 mg/day raises free testosterone and supports libido; Cialis DP (Tadalafil) if ED is present; address root E2 levels before adding PDE5 inhibitors — PDE5 inhibitors do not correct hormone imbalance; post-cycle: resolves with successful PCT |
| Natural testosterone suppression | Like all AAS, Suspension suppresses the HPG axis — endogenous LH and FSH drop and testicular testosterone production slows during the cycle; suppression is proportional to dose and duration | PCT planning is essential; for cycles ≥ 8 weeks, run HCG on-cycle at 250–500 IU twice weekly or as a pre-PCT blast; start SERMs 24–48 hours after the last Suspension injection; see the PCT section below |
Bloodwork Monitoring
| Lab | When to Test | Target & Action Threshold |
|---|---|---|
| Hematocrit | Baseline (mandatory); week 6; end of cycle | Keep < 52%; above 54%: reduce dose, increase hydration, consider therapeutic phlebotomy; daily Suspension injections sustain continuous high-peak testosterone that stimulates EPO more persistently than long-ester protocols — hematocrit can escalate faster than expected |
| CBC (complete blood count) | Baseline; week 6 | RBC, WBC, and platelet counts within reference range; flag any unexplained elevation in RBC not accounted for by training adaptation; elevated WBC without infection cues warrants investigation before continuing the cycle |
| Lipid panel (HDL / LDL) | Baseline; week 4–6 | HDL > 40 mg/dL; LDL < 130 mg/dL; if HDL drops below 35 or LDL exceeds 160: introduce statin and reassess the stack; testosterone alone is less lipid-aggressive than stacked protocols involving Winstrol or Trenbolone |
| Estradiol (E2) | Week 2–3 after AI protocol is established; mid-cycle | Target 20–40 pg/mL on sensitive assay; test on a non-injection day for a representative trough reading — testing immediately post-injection captures the spike, not the steady-state level used for AI adjustment |
| Blood pressure | Weekly throughout cycle (home cuff) | < 130/80 mmHg; daily injection frequency and short half-life make BP more variable than with long-ester cycles; test at consistent times, ideally morning pre-injection for a reproducible baseline reading |
| LH + FSH | Baseline; mid-PCT (week 2–3); end of PCT | Both < 1 IU/L expected on cycle; recovery to mid-normal (> 3 IU/L) within 8–12 weeks post-cycle confirms functional HPG axis recovery; delayed recovery at the PCT week 3 check warrants adding Clomid if only Nolvadex is being used |
| Total testosterone | Baseline (mandatory pre-cycle); 4–6 weeks post-PCT completion | Baseline establishes individual natural range; post-PCT target is recovery to within 10–15% of pre-cycle baseline; LH and FSH normalization should precede or coincide with testosterone recovery, confirming the axis is driving production rather than residual exogenous compound |
PCT
One practical advantage of Suspension 100 is PCT entry timing: because there is no ester to clear, HPG axis recovery can begin 24–48 hours after the last injection. Compare this to 14 days for testosterone enanthate or 3–5 days for testosterone propionate. For short cycles this makes Suspension particularly clean to exit.
| Phase | Protocol | Notes |
|---|---|---|
| PCT start | Begin 24–48 hours after the last Suspension injection | The compound clears within 24–48 hours; no washout period is needed unlike long-ester testosterones; if Suspension was used alongside a long-ester compound (Enantat 250, Deca 300), PCT timing follows the slowest-clearing compound, not Suspension |
| PCT weeks 1–4 (cycles ≤ 8 weeks) | Nolvadex Dragon Pharma 20 mg/day for 4 weeks; optionally add Clomid Dragon Pharma 50 mg/day for first 2 weeks | Single SERM (Nolvadex) is adequate for shorter cycles; add Clomid if LH/FSH recovery is slow at the week 2 bloodwork check; both SERMs can be run together for heavier suppression from longer or higher-dose protocols |
| PCT weeks 1–6 (cycles ≥ 8 weeks) | Clomid DP 50/50/25/25 mg/day + Nolvadex DP 20 mg/day for 6 weeks | Dual SERM for longer cycles or where prior cycles have produced sluggish HPG recovery; taper Clomid in weeks 3–4; continue Nolvadex at 20 mg/day through week 6 |
| HCG pre-load (cycles ≥ 8 weeks) | HCG 5000 IU Dragon Pharma 2,500 IU every 4 days × 2 doses, starting 24 h after the last injection; begin SERMs 4 days after the last HCG dose | Prevents testicular atrophy and accelerates recovery on longer cycles; not mandatory for cycles of 4–6 weeks but worth including if testicular volume reduction is noted during the cycle; do not run HCG and SERMs simultaneously |
| Post-PCT bloodwork | Total testosterone, LH, FSH — 4–6 weeks after stopping SERMs | Testosterone should return to within 10–15% of pre-cycle baseline; LH and FSH > 3 IU/L confirms axis recovery; do not plan the next cycle until these markers are confirmed |
Practical Summary
- No ester means 100% of the dose is active testosterone; inject 30–60 min pre-workout for an acute androgen peak, or daily/EOD to maintain stable blood levels throughout the cycle — pre-workout timing alone does not sustain stable hormone levels between sessions
- Water-based suspension requires needle warming, consistent site rotation, and slow injection technique to minimize PIP; a 23–25G needle is standard; document injection sites and rotate systematically to avoid repeated irritation at the same location
- High aromatization makes AI management mandatory from day one — run Arimidex DP 0.5 mg EOD as baseline and test E2 on a non-injection day for an accurate trough reading; over-suppressing E2 causes joint pain, libido loss, and worsens the lipid profile
- Monitor hematocrit at week 6; continuous high-peak testosterone from daily injections stimulates EPO more persistently than long-ester cycles and can push hematocrit higher faster than expected — this is the most underestimated cardiovascular risk of Suspension protocols
- PCT begins 24–48 h after the last injection — the fastest re-entry window of any testosterone form; for cycles ≥ 8 weeks, include an HCG pre-load before starting Clomid + Nolvadex; do not begin SERMs while still running an AI at full suppressive dose
- Keep lipid panel, blood pressure, and E2 tested at least once mid-cycle; short half-life creates more variable hormone peaks than long esters and warrants a tighter monitoring cadence than a twice-weekly injection protocol
Testosterone Suspension remains one of the most direct and technically demanding testosterone options available — a compound where the mechanism is identical to every other testosterone form, but the delivery is stripped to its fastest possible expression. For strength athletes who need a precise androgen spike timed to performance, or bodybuilders entering the final phase of a prep who want testosterone drive without an ester tail complicating clearance, Suspension 100 by Dragon Pharma delivers exactly that. Steroid Warehouse stocks Dragon Pharma's full injectable testosterone lineup alongside the complete cycle support range needed to run it safely — AI, PCT, and bloodwork-guided management all in one place.
References
| Source | Topic | Link |
|---|---|---|
| New England Journal of Medicine / PubMed | Bhasin et al. 1996 — randomized controlled trial using 600 mg/week testosterone enanthate for 10 weeks, showing increased fat-free mass, muscle size, and strength, especially when combined with resistance training; foundational evidence for supraphysiologic androgen anabolic effects | Bhasin S, et al. (1996) ↗ |
| NCBI Bookshelf / StatPearls | Anabolic steroids overview — synthetic testosterone-derived AAS pharmacology, androgen receptor mechanism, anabolic-androgenic effects, oral and injectable steroid classes, misuse patterns, monitoring, and adverse effect profile | StatPearls: Anabolic Steroids ↗ |
| NCBI Bookshelf / Endotext | Androgen physiology and pharmacology — testosterone and androgen derivative mechanisms of action, androgen receptor activity, HPG axis suppression, 5α-reduction, estradiol aromatization, synthetic androgen pharmacology, and androgen misuse context | Endotext: Androgen Physiology, Pharmacology, Use and Misuse ↗ |
| Journal of Clinical Endocrinology & Metabolism / PubMed | Bhasin et al. 2018 — Endocrine Society clinical practice guideline for testosterone therapy in men with hypogonadism; useful for diagnostic standards, contraindications, monitoring, and separating medical TRT from non-medical supraphysiologic AAS use | Bhasin S, et al. (2018) ↗ |
| Circulation / PubMed | Baggish et al. 2017 — human study of cardiovascular toxicity associated with long-term illicit anabolic-androgenic steroid use; links chronic AAS exposure with myocardial dysfunction and accelerated coronary atherosclerosis | Baggish AL, et al. (2017) ↗ |
Please log in to write review.
-
Suspension is a hardcore injectable form of testosterone in a water base. Professionally made in a custom vial with firm crimping around the rubber stopper and flip cap, plus a glossy straight label. Quality packaging all around. The larger particle size means you'll need at least a 23 gauge needle, but the good news is you only need to inject every other day instead of daily. Pro tip - if you draw a little oil into the syringe first before withdrawing the suspension, it helps lubricate the needle and makes injections way smoother. If you're seeking rapid size and strength, look no further! This is the strongest form of testosterone, no doubt. The gains come fast and hard. I highly recommend this suspension if you want serious results and can handle the injections.
-
They did exactly what they were made for. I can't complain helped me through hard workouts. With the endurance I needed. With the results I was looking for.
What is Suspension 100?
Suspension 100 is an injectable Testosterone Suspension for rapid muscle growth; see What is Suspension 100. It's fast-acting—consult professionals for safe use.
Is there anything stronger than Suspension 100?
Compounds like Trenbolone or Methyltrienolone may be stronger but riskier; see Is There Anything Stronger Than Suspension 100. Consult professionals for alternatives.
How does Suspension 100 work?
It binds androgen receptors for rapid muscle and strength gains; see Mechanism of Action. It delivers immediate results—monitor with labs.
Is Suspension 100 safe?
It's safe with strict dosing and monitoring; see Side Effects. Manage risks with ancillaries—consult professionals for safety.
What is Suspension 100 used for?
It's used for rapid muscle growth, strength, and performance in bulking or cutting; see Key Benefits. It suits advanced users—use with professional oversight.
How long does it take to notice effects from Suspension 100?
Due to its ester-free formulation, Suspension 100 is known for producing effects much faster than traditional testosterone esters, with many users reporting rapid improvements in strength, performance, and muscle fullness.
What are the main benefits of Suspension 100?
Commonly reported benefits include rapid strength increases, enhanced workout performance, improved muscle pumps, increased muscle mass, and faster recovery support.
What are the possible side effects of Suspension 100?
Potential side effects may include water retention, acne, oily skin, estrogen-related effects, increased blood pressure, and suppression of natural testosterone production.
Related Products
Available Domestic
Lab Tested
Accutane 20 Dragon Pharma
Isotretinoin 20 mg · oral retinoid · non-hormonal · acne-focused
Category
Oral Retinoid
Vitamin A derivative
Form / Strength
Oral tablet
20 mg per tab
Context
Severe Acne
Cystic · cycle-induced
Monitoring
Liver + Lipids
ALT · LDL · TG
Typical Dose
0.5–1 mg/kg
per day
Duration
16–24 wks
typical course
Key Labs
ALT · LDL · TG
before + monthly
Available Domestic
Lab Tested
Arimidex Dragon Pharma
Anastrozole 1 mg · Aromatase Inhibitor · non-steroidal
Category
Aromatase Inhibitor
Non-steroidal AI
Form / Strength
Oral tablet
1 mg per tab
Context
Estrogen control
with aromatizing AAS
Monitoring
Estradiol (E2)
+ lipid panel
Typical Dose
0.5–1 mg
per day or EOD
Duration
Active cycle
aromatizing phase
Key Labs
E2, lipids
baseline + mid-cycle
Lab Tested
- Accelerates muscle and tendon repair for quick recovery.
- Reduces inflammation systemically and locally.
- Enhances joint and tissue resilience for intense training.
- Supports comprehensive healing for uninterrupted performance.
Available Domestic
Best Seller
Lab Tested
Clomid Dragon Pharma
Clomiphene citrate · SERM · 50 mg/tab
Category
SERM
non-steroidal / clomiphene
Form / Strength
Oral tablet
50 mg per tablet
Context
PCT · LH · FSH
testosterone recovery
HPG Axis
Stimulant
↑ LH · ↑ FSH · ↑ T
Typical Dose
25–50 mg
per day
Duration
4–6 weeks
post cycle
Combines With
Nolvadex · HCG
standard PCT stack
Available Domestic
Lab Tested
Deca-500 Dragon Pharma
Nandrolone Decanoate · 500 mg/ml
Class
Anabolic Steroid
19-nor testosterone derivative
Half-life
~15 days
decanoate ester, weekly dosing
Context
Bulking · Joints
high-dose, low injection volume
Administration
IM injection
weekly or E5D
Typical Dose
400–600 mg/wk
always with testosterone base
Frequency
Weekly / E5D
stable long-ester levels
Cycle Length
12–16 weeks
PCT 3 weeks after last pin
Available Domestic
Best Seller
Lab Tested
Dragontropin Dragon Pharma
Somatropin 10 IU/vial · Peptide Hormone (rHGH) · non-androgenic, non-estrogenic
Class
Peptide Hormone
Recombinant HGH (191 aa)
Kit / Active Life
100 IU (10×10 IU)
~3–5 h plasma; IGF-1 ~24 h
Aromatization
None
No estrogen or androgen conversion
User Level
Intermediate
to Advanced
Typical Dose
2–6 IU
per day
Injection Timing
Daily
AM fasted or pre-sleep
Run Length
16–24 weeks
minimum for results
Available Domestic
Best Seller
Lab Tested
Enantat 250 Dragon Pharma
Testosterone Enanthate 250 mg/mL · Long-Ester Injectable · high aromatization
Class
Androgenic-Anabolic
Testosterone / Enanthate ester
Ester / Active Life
Enanthate (C8)
~4.5 day t½ · 8–10 days active
Aromatization
High
AI required from day 1
User Level
Beginner
to Advanced
Typical Dose
250–750 mg
per week
Injection Frequency
E7D or E3.5D
once or twice weekly
Cycle Length
10–16 weeks
PCT 14 days after last pin
Available Domestic
Lab Tested
HCG 5000IU Dragon Pharma
Human chorionic gonadotropin · 5,000 IU/vial · LH receptor agonist · SubQ injection
Category
Gonadotropin
LH mimetic · non-androgenic
Form / Strength
Lyophilized vial
5,000 IU · reconstitute before use
Context
Extended cycles 12+ wk
On-cycle maintenance · pre-PCT blast
Administration
SubQ injection
29–31 G insulin syringe
On-Cycle Dose
250–500 IU
twice weekly · 1 vial = 5–10 wk
Pre-PCT Blast
2,500 IU
2 blast injections per vial
Vials for Blast
2 vials
days 0, 3, 6 · stop 72 h before SERMs