Bacteriostatic Water Dragon Pharma

Subtotal	$0.00
Shipping	$0.00
Total	$0.00

Bacteriostatic Water Dragon Pharma

0.9% Benzyl Alcohol · Sterile · Multi-Use · Peptide & HGH Reconstitution

Preservative

0.9% Benzyl Alcohol

inhibits bacterial & fungal growth

Multi-Use

Multiple draws per vial

28–30 days after first use

Peptide & HGH Reconstitution

all lyophilized injectable compounds

Storage

Refrigerate after opening

2–8°C · avoid freezing

Administration

SC · IM only

never intravenous (IV)

Reconstitution Vol.

1–2 ml per vial

peptide-specific protocol

Compatibility

All peptides · HGH

universal reconstitution standard

Available Domestic

$25.00

In Stock

Manufacturer	Dragon Pharma
Brand	Bacteriostatic Water
Substance	Sterile water
Concentration	0.9%
Pack Size	vial

Shipping

International U.S. Domestic

Description
FAQ

Bacteriostatic Water Dragon Pharma — Overview

Bacteriostatic Water Dragon Pharma is sterile water for injection preserved with 0.9% benzyl alcohol — the standard diluent for reconstituting lyophilized peptides, HGH, and other freeze-dried injectables. Unlike plain sterile water, it allows multiple draws from the same vial over 28–30 days without compromising sterility. Available at Steroid Warehouse alongside the full Dragon Pharma peptide and HGH catalog.

0.9% Benzyl Alcohol Multi-Use Vial SC / IM Only 28–30 Day Shelf Life Peptide Reconstitution HGH Reconstitution

On this page

About the Product
What It Does
Who It's For
BAC Water vs Alternatives
Compatible Compounds & Reconstitution Guide
Storage & Handling
Practical Summary
References

About the Product

Composition: Sterile water for injection (WFI, USP grade) + 0.9% benzyl alcohol. Benzyl alcohol is the active preservative; the water base is pyrogen-free and pH-adjusted to approximately 5.0–6.0 — within the stability range of most injectable peptides.
Bacteriostatic mechanism: Benzyl alcohol disrupts bacterial cell membranes and inhibits enzymatic activity, preventing the growth of contaminants introduced during repeated needle entry. "Bacteriostatic" is precise — it slows and prevents growth; it does not sterilize an already-contaminated solution.
Why 0.9% benzyl alcohol: Lower concentrations reduce bacteriostatic efficacy. Concentrations above 2% increase injection-site irritation risk with repeated SC/IM use. The 0.9% standard has been in routine pharmaceutical use for decades and is well-tolerated at typical peptide injection volumes.
Not the same as normal saline: Despite the shared "0.9%" figure, these are unrelated products. BAC water contains benzyl alcohol in water; normal saline contains sodium chloride in water. They are not interchangeable — check your compound's protocol before substituting.

What BAC Water Does

Reconstitutes lyophilized powders: Dissolves freeze-dried peptide or HGH powder into a clear, injectable solution — the required step before any lyophilized injectable can be administered.
Extends vial shelf life: Reconstituted peptides remain stable for 28–30 days refrigerated when BAC water is used, versus approximately 24 hours with plain sterile water for injection.
Supports multi-dose protocols: Benzyl alcohol preserves sterility across multiple needle entries, making daily or twice-daily peptide dosing practical from a single reconstituted vial.
Neutral to compound activity: When used in appropriate volumes, BAC water does not alter the biological activity of reconstituted peptides or HGH. The water provides a carrier vehicle only — no pharmacological contribution of its own.

Who It's For

BAC water is the standard reconstitution diluent for virtually all lyophilized injectable peptides and HGH. The relevant question is not whether to use BAC water — but when to use it versus alternatives.

Daily peptide protocols: Any compound dosed once or twice daily — Ipamorelin, GHRP-2, GHRP-6, CJC-1295, BPC-157, TB-500 — should be reconstituted with BAC water to maintain sterility across the full vial duration. Single-use diluents are impractical and expensive for multi-week peptide runs.
HGH users (Dragontropin): HGH vials drawn over multiple days require a multi-draw diluent. BAC water is the pharmaceutical standard for this application and is what most Dragontropin protocols specify.
Not the right choice for same-day single use: If a compound is fully drawn in a single session, plain sterile water for injection is acceptable. BAC water's preservative function is unnecessary for single-draw use — though using it causes no harm.
Not for intravenous administration: Benzyl alcohol is contraindicated for IV use. BAC water is strictly SC and IM. Users who require IV-compatible reconstitution should use preservative-free sterile water for injection instead.

BAC Water vs Alternatives

Product	Key Differences	Choose BAC Water Dragon Pharma When	Choose This Alternative When
BAC Water Dragon Pharma	0.9% benzyl alcohol; part of Dragon Pharma's injectable support lineup; QC consistent with their peptide and HGH range	Running Dragon Pharma peptides or HGH; convenient single-order sourcing with your compounds	—
BAC Water Kalpa	Same 0.9% benzyl alcohol formulation; Kalpa Pharmaceuticals brand; functionally equivalent	—	Prefer Kalpa brand or ordering alongside Kalpa peptide products
Sterile Water for Injection (WFI)	No preservative — single-use only; IV-compatible; reconstituted solution stable ~24 hrs only	—	Single-session full vial use; compound protocol specifies preservative-free WFI; IV-adjacent applications
0.9% NaCl (Normal Saline)	Isotonic sodium chloride solution; unrelated to BAC water despite the shared 0.9% figure	—	Compound protocol explicitly requires an isotonic saline diluent (uncommon for standard peptides)

Compatible Compounds & Reconstitution Guide

Dragon Pharma peptides and HGH products available at steroidwarehouse.com — all using BAC water as the standard diluent. Reconstitution volume determines concentration per unit dose; confirm against your dosing protocol before drawing.

Compound	Typical Vial Size	Recommended BAC Water	Notes
Dragontropin (HGH)	10 IU per vial	1–2 ml	1 ml = 10 IU/ml; 2 ml = 5 IU/ml. Inject BAC water slowly down the glass wall; swirl gently — never shake.
BPC-157 Dragon Pharma	5 mg per vial	1–2 ml	1 ml = 5,000 mcg/ml; 2 ml = 2,500 mcg/ml. Typical dose 250–500 mcg — draw accordingly per syringe markings.
BPC-157 + TB-500 Blend	5 mg BPC / 5 mg TB-500	2 ml	2 ml = 2,500 mcg/ml per component. SC standard; IM acceptable for larger TB-500 doses.
Ipamorelin Dragon Pharma	2 mg per vial	1–2 ml	1 ml = 2 mg/ml (200 mcg per 0.1 ml); 2 ml = 100 mcg per 0.1 ml. Typical dose 200–300 mcg per injection.
CJC-1295 / Ipamorelin Blend	10 mg combined	2 ml	2 ml = 5 mg/ml total; each component at half that concentration. Follow blend-specific dosing targets.
CJC-1295 DAC Dragon Pharma	2 mg per vial	1–2 ml	DAC variant — extended half-life allows 1–2×/week dosing. Reconstitution approach identical to non-DAC.
GHRP-2 Dragon Pharma	5 mg per vial	2 ml	2 ml = 2,500 mcg/ml. Typical dose 100–300 mcg per injection, 2–3× daily. Less appetite stimulation than GHRP-6.
GHRP-6 Dragon Pharma	10 mg per vial	2 ml	2 ml = 5,000 mcg/ml. Same dosing approach as GHRP-2; note significant appetite stimulation — plan meals accordingly.
Hexarelin Dragon Pharma	2 mg per vial	1–2 ml	Higher potency per mcg than GHRP-2. Typical dose 100–200 mcg per injection; start at the lower end.
IGF-1 LR3 Dragon Pharma	1 mg per vial	1 ml	IGF-1 LR3 stability is optimized in dilute acetic acid; BAC water is an acceptable substitute where acetic acid is unavailable. Use promptly after reconstitution.
AOD-9604 Dragon Pharma	5 mg per vial	2 ml	2 ml = 2,500 mcg/ml. Typical dose 250–300 mcg, fasted morning injection for lipolytic effect.
Epitalon Dragon Pharma	10 mg per vial	2 ml	2 ml = 5,000 mcg/ml. Typical protocol: 5–10 mg/day for 10–20 days; draw 0.1–0.2 ml per injection.
GHK-Cu Dragon Pharma	50 mg per vial	5 ml	5 ml = 10 mg/ml. SC injection; typical use 1–2 mg/day for skin regeneration and wound healing applications.

Storage & Handling

Before opening: Room temperature (15–25°C), away from direct light and heat. Unopened vials maintain integrity for the duration of their labeled shelf life under correct conditions.
After first use: Refrigerate immediately at 2–8°C. Discard after 28–30 days from first needle entry, regardless of remaining volume.
Never freeze: Freezing does not improve preservation and can compromise benzyl alcohol distribution in the formulation.
Aseptic draw: Wipe the rubber stopper with an alcohol swab before each use. Use a new insulin syringe (28–31G) for every injection — never re-enter the reconstituted peptide vial with a used needle.
Adding to vial: Direct the BAC water stream down the inside glass wall, not onto the lyophilized powder cake. Gently swirl to mix — shaking introduces air bubbles and can degrade sensitive peptide structures.
Discard criteria: Cloudiness, visible particulates, or any discoloration after reconstitution are discard indicators — do not use regardless of date.

Practical Summary — Bacteriostatic Water Dragon Pharma

Add BAC water to the peptide vial slowly — inject down the glass wall, not onto the lyophilized cake; swirl gently, never shake
Working volume: 1–2 ml per vial; smaller volume = higher concentration per unit dose — choose based on your target dose and syringe markings
Multi-dose safety: one draw per insulin syringe; never re-enter the reconstituted compound vial with a used needle
Refrigerate at 2–8°C after first use; discard the reconstituted vial after 28–30 days regardless of remaining volume
SC and IM use only — benzyl alcohol is contraindicated for intravenous administration
steroidwarehouse.com carries BAC Water Dragon Pharma alongside the full peptide and HGH lineup for single-order convenience

Bacteriostatic Water Dragon Pharma is a straightforward but essential component of any peptide or HGH protocol. Its 0.9% benzyl alcohol formulation handles the practical challenge of multi-dose injectable use — preserving sterility across repeated vial entries and extending usable shelf life to roughly four weeks. For athletes and individuals running daily peptide regimens, this removes the need to reconstitute fresh every 24 hours. The product adds no pharmacological activity of its own; its value is entirely operational. Paired with the correct compound and a basic aseptic draw technique, it covers the reconstitution requirement for virtually the entire injectable peptide catalog available at Steroid Warehouse.

References

Source	Topic	Link
FDA / DailyMed	Bacteriostatic Water for Injection, USP — official prescribing information for sterile water containing benzyl alcohol as a bacteriostatic preservative; covers composition, repeated withdrawal use, warnings, neonatal toxicity concern, IV administration warning, storage, and handling	DailyMed: Bacteriostatic Water ↗
Journal of Pharmaceutical Sciences / PubMed	Roy S et al. 2005 — study of recombinant human growth hormone reconstitution with 0.9% benzyl alcohol; reports increased protein aggregation compared with water and provides formulation context for preservative-related compatibility concerns in protein injectables	Roy S, et al. (2005) ↗
International Journal of Pharmaceutics / PubMed	Wang W 1999 — comprehensive review of instability, stabilization, and formulation of liquid protein pharmaceuticals; covers protein instability, aggregation, solution conditions, excipients, preservative effects, and formulation principles relevant to peptide and protein handling	Wang W (1999) ↗
Pharmaceutical Research / PubMed	Chi EY et al. 2003 — review of physical stability of proteins in aqueous solution; explains mechanisms and driving forces of nonnative protein aggregation and how temperature, pH, salts, cosolutes, preservatives, surfactants, storage, and handling can affect protein stability	Chi EY, et al. (2003) ↗

What is Bacteriostatic Water?

Bacteriostatic Water is sterile water with 0.9% benzyl alcohol for peptide reconstitution; see What is Bacteriostatic Water. It ensures safe injections—consult professionals for use.

How does Bacteriostatic Water work?

It dissolves peptides for injection and prevents bacterial growth; see Mechanism of Action. It's a safe diluent—use sterile techniques.

What is Bacteriostatic Water used for?

It's used to reconstitute peptides and injectables; see Key Benefits. It suits bodybuilding protocols—use with professional oversight.

What makes Bacteriostatic Water different from sterile water?

Unlike sterile water, Bacteriostatic Water contains benzyl alcohol, which helps inhibit bacterial growth and allows the solution to be used multiple times when handled properly.

Why is Bacteriostatic Water commonly used with peptides?

Many peptides are supplied in lyophilized form and require reconstitution before use. Bacteriostatic Water is widely used because its preservative helps maintain solution integrity after mixing.

Can Bacteriostatic Water be used for multiple reconstitutions?

Yes. The preservative system is designed to help inhibit bacterial growth, making it suitable for multiple withdrawals when proper sterile technique is followed.

Are there any precautions when using Bacteriostatic Water?

Users should always maintain sterile handling practices, avoid contamination of the vial, and inspect the solution before use to ensure it remains clear and free of particles.

Why is Bacteriostatic Water important in peptide preparation?

Bacteriostatic Water helps provide a convenient and reliable medium for peptide reconstitution while offering additional protection against bacterial contamination compared to preservative-free sterile water.

Related Products

Available Domestic

Lab Tested

Dragon Pharma

Arimidex

5 on 5 reviews

💊

Arimidex Dragon Pharma

Anastrozole 1 mg · Aromatase Inhibitor · non-steroidal

🧬

Bacteriostatic Water Dragon